Control panel and Machine

Give Your Washing Machine This Extremely Critical Check-Up Now

As wonderful as a washing machine is when it comes to saving time and effort, it can also be a troublesome member of the household. It is critical that you perform a washing machine check-up now.


Control panel and Machine

Washing machines are responsible for more than $150 million of damage in homes across the U.S. every year. Imagine a river flowing from your laundry room with hundreds of gallons of water per hour, pouring over thresholds and flooring, soaking your furniture and prized collectibles. It happens.

Imagine a river flowing from your laundry room with hundreds of gallons of water per hour, pouring over thresholds and flooring, soaking your furniture, and prized collectibles. It happens.

Washing machine hoses score number one in the line up of the most neglected maintenance items in a home.

Last year, State Farm alone paid more than 7,500 water damage claims from broken washing-machine hoses. These claims ranged from a few hundred dollars to more than $100,000. There are steps you can and should take routinely to make sure this does not happen to you.

Supply hose leaks

More than 50% of all washing machine water damage claims can be traced back to a supply hose failure. This can be caused by:

  • The hose got pinched during installation or when moved, causing a hairline break
  • A faulty connection to either the washing machine or wall
  • The hose is old and has become brittle

Annual check-up

If you have a washing machine you need to check the water inlet or “water-fill” hoses at least once a year. Not performing a washing machine check-up is like not checking the oil in your car. Nothing seems to be amiss until your life flashes in front of you as you see your sofa floating down the front walkway. 

What to consider

There are two hoses inlet hoses that connect the machine to the cold and hot water faucets. You cannot tell by simply looking at these hoses if they need to be replaced. Age, chemicals in the water and build-up of calcium deposits over time can degrade rubber. And to complicate matters further, even a “new” hose could be old having lived a good deal of its life in a warehouse. You can’t tell by simply looking.

However, if you do see a small blister in the rubber of the hose assume that is a disaster just waiting to happen. If the rubber feels brittle or shows any signs of cracking, replace it immediately.


A close up of a bicycle


Every 3 years, regardless

If you cannot remember replacing your water inlet hoses, put that on your list for next weekend. Then do it again in three years. Most manufacturers and all insurance companies recommend replacing the hoses every three to five years. You cannot be too cautious.

We are a Everyday Cheapskate participates in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn from qualifying purchases, at no cost to you., an affiliate advertising program. As an Amazon Associate, we earn from qualifying purchases by linking to Amazon affiliated sites.

Two types of hose

There are two types of hoses available: Rubber hoses for about $5 each or braided, stainless steel hoses for about $15 each. While stainless steel hoses with a twisted flexible mesh of stainless steel wire appear to have the edge when it comes to performance, they are not foolproof. The connectors can break loose and the rubber interior of the metal hose can deteriorate. They must be replaced every three years.

While flexible mesh hoses are a bit more expensive than rubber hoses, the added safety is worth the extra money. The braided stainless steel encases a rubber hose and provides a burst-resistant measure giving these hoses a lower failure rate than rubber hoses when properly installed.

DIY installation

Installing new hoses is not at all difficult. It’s like attaching a garden hose. But beware. Installation error is the biggest cause of premature hose failure. Sharp kinks or bends in the hose can weaken the hose itself or the seal at the connector.


Hose and Machine


To prevent this you need to allow 3 to 4-inches between the back of the washing machine and the wall. If you have a tight installation such as an old shallow laundry closet, there are hoses available that have right-angle connectors allowing the machine to be placed closer to the wall. You may have to special order this unusual item.

Need help with performing a washing machine check-up and or figuring out which hoses you need? The online site will come to your rescue with diagnoses, repair instructions and maintenance tips for all your household appliances.

First published: 10-15-15; Expanded & Updated 7-15-19

More from Everyday Cheapskate

Worried young housewife and repairman near broken washing machine at home kitchen
shoe repair
Close-up Of Thermostat And Piggy Bank With Eyeglasses On Radiator Against White Wall
powerstrip with plugins
sink drain unclogged with clear water running freely
Set of home kitchen appliances in the room on the wall background. 3D render
home DIY appliance mainteanance collage-3
home maintenance tips collage
hand holding steam generator iron

Please keep your comments positive, encouraging, helpful, brief,

and on-topic in keeping with EC Posting Guidelines

Print Friendly, PDF & Email
5 replies
  1. christina Goff says:

    I am lucky my brothers are handy and can usually figure out how to fix things by looking it up online. I buy used because they are usually easier to work on. There is a guy in town that used to have an appliance repair shop and my brothers asked him questions the last time we had a problem. He told him the two things to check and where to go to get the parts. I paid $20 for my dryer and got my washer free on freecycle and they have been going strong for 10 years so I got my money’s worth. I can’t afford the quality washer and dryers. The companies told me they only last 3 years now (that is forever they told me) and I want one that lasts like my parents did. I want my monies worth I guess. I believe in quality products that last besides I am saving them from the landfills so I feel good about it. I only use my dryer if I have to. I use the clothes line weather permitting.

  2. Suzanne Mulloy says:

    I had a plumber install a single lever shut off valve between the two supply lines. I flip it down to wash clothes and then flip it back up when I am done, eliminating any chance of a ruptured hose or flood.

  3. Spice Weasel says:

    And when you replace the hoses, for heaven’s sake, make sure that you don’t mix up the hot and cold! The installer did that when I bought my new washer and I shrunk a load of cotton shorts and capris which I thought I was washing in Cold water but was actually washing in straight HOT water.

  4. Paula Herion says:

    While you are back there, check your dryer vent hoses. Dryer lint from defective hoses, can cause fires. Clogged vents can make your dryer stop drying.

  5. Desiree Dogood says:

    Yeah, I had a washing machine hose break about 35 years ago. Fortunately it was located in the garage, but it was still a mess and I didn’t forget the lesson. I occasionally check the hoses and replace them after several years.


Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *