A plugged up sink, shower or tub drain sends most people running for either a bottle of caustic drain cleaner, or a plumber’s phone number. But wait. This could well be a job you can do yourself without chemicals or a big bill.
Assess the situation. Turn on taps to allow water down other drains in the house. If everything else is flowing freely, you can be fairly certain you have a localized clog—and probably near that clogged drain’s opening. If this is involving other drains, you could have a bigger problem that may well require a professional. Assuming it’s only the one drain, let’s move on.
Boiling water. Get a large pot and boil up as much water as it will hold. Now carefully pour boiling water down the drain slowly, in two to three stages so that the hot water can work for a few minutes in between each pour. This is the easiest and quickest way to unclog a drain if it works, which usually it does with a satisfying swoosh.
Reach in. Remove the strainer that is part of the drain plug, then reach into the drain with your fingers (latex gloves would be a good idea here) and pull out any solids. As gross as this might be, it is often all that’s needed to clear a slow-moving or clogged drain.
Zip it. If you cannot reach the clog with your fingers, your next best friend is this cheap plastic tool, Zip It, available at home improvement centers or online. This simple tool is flexible enough to allow you to push it down into the turns of the drain. It has teeth along each side that once you’re in and you twist it, you’ll be able to pull out all manner of drain offenders. Keep working at it, until you pull out as much as you can. Now run the hot water and that should clear things up nicely.
A reader introduced me to Zip It years ago. At under five bucks, this handy dandy tool is worth its weight in gold. It’s great to clear drains, but also works well to maintain drains before they get clogged.
Wet dry vacuum. If you have one of these, it just might help you to clear the drain without having to get your hands dirty. First, set it to “wet” so it vacuums liquids. Cover or close the drain’s vent. Make the tightest seal you can with the hose end of the vacuum over the drain. Get creative with duct tape or the like. With the vacuum set to its most powerful setting, it can be powerful enough to pull that clog right out of the drain. No guarantees here, but it’s worth a shot.
Baking soda and vinegar. Measure out 1/3 cup baking soda and get as much of it down the drain as you can. Follow with 1/3 cup white vinegar. It will fizz up and make quite a show. Allow it to sit for at least an hour, or overnight if at all possible. In the morning following with a quart or two of boiling water.