Pristing restroom with white toilet and toilet brush

How to Get Rid of The Dreaded Toilet Bowl Ring

It’s not the most elegant question I get, but certainly one of the most common. “I’ve tried everything I can think of, but that stubborn, ugly toilet bowl ring won’t go away!” Or ” … It goes away, but just keeps coming back!”

 

Pristing restroom with white toilet and toilet brush

 

Toilet bowls develop discolorations for many reasons that have nothing to do with the quality of the housekeeping. Basically, the dreaded toilet bowel ring is the result of hard water conditions together with water standing in a toilet that sees a lot of use.

While there are lots of commercial products out there that promise to remove hard water stains in the toilet, ordinary household pantry items you have already can be just as effective to rid your toilet of the dreaded toilet bowl ring without harsh chemicals.

What are those stains, anyway?

Toilet bowl stains that look like rust are likely due to mineral deposits and hard water. Green, orange or black streaks or rings may be mold. A bacteria called Serratia marcescens shows up as pink. Knowing what is causing the ring makes it easier for you to choose the best method for getting rid of it.

Under most conditions, regular weekly cleaning prevents heavy stain buildup and reduces the appearance of any existing stains so the bowl can look pristine and white again.

And when none of that works? Don’t worry, I have the mother of all solutions for that too, in a bit. But let’s start with the easiest.

Warnings

  1. Make sure you protect your hands with rubber gloves.
  2. Never mix bleach with anything other than water, because doing so can cause dangerous chemical reactions.

Baking soda and vinegar

These two common, non-toxic and harmless edible items when used together strategically, are powerful to clean things, including hard water stains in the toilet.

  1. Pour 1 cup of ordinary white vinegar into the toilet bowl. Using a toilet brush, swish it around. Let it sit for a minute or so.
  2. Sprinkle a cup of baking soda into the toilet bowl followed by 2 more cups of vinegar. Get ready as this is going to create a fizzing action. Leave it be for about 10 minutes.
  3. Using the toilet brush, swish some more because you want to make sure this solution reaches stains above the water line and under the rim. Still, do not flush.
  4. Let the solution sit for 30 minutes, swishing occasionally until the stains are gone. For any stain that remains, scrub it with the toilet brush or scrubby sponge. Flush the toilet to rinse.

Borax and vinegar

Borax is stronger, yet common, household multi-purpose cleaning product can be used to clean hard water stains in the toilet.

  1. Sprinkle 1/4 cup of borax into the toilet bowl and swish it around with a toilet brush.
  2. Add 1 cup of vinegar, swish around again, and let the mixture sit in the bowl for about 20 minutes.
  3. Finish by scrubbing the bowl with a toilet brush to remove the stains. Flush to rinse.

Bleach

  1. Carefully pour 1 cup of liquid chlorine bleach into the toilet bowl. Let it sit for 30 minutes if you are trying to get rid of mold or bacteria. Do not use cleaners containing bleach because, believe it or not, they can make this kind of stain permanent.
  2. Scrub the inside of the toilet thoroughly with a toilet brush. Make sure you get the space up under the rim.
  3. Flush the toilet to rinse away the bleach.

Pumice

Some stains and toilet rings are so stubborn, they’re beyond baking soda, borax, vinegar, or bleach. Sadly, they’ve become permanent. But I have a solution for even those stains, so dry your tears!

What follows is to be used only occasionally, and very carefully. Overuse, or using the wrong product, can damage the surface of the vitreous china, which that toilet bowl is made of. Careful use, infrequent use, however, is like magic!

I recommend Pumie Toilet Bowl Ring Remover. As pumice stones go, this one is soft and when used infrequently, will not harm the surface of the toilet bowl. Pumie comes with a handle that makes it easy to use.

Clean regularly

You do not need to use strong and costly chemicals to prevent hard water toilet stains. Borax, vinegar, and baking soda do a great job of cleaning and disinfecting. They will prevent hard water stains from building up when used regularly.

To help keep your toilet clean and free of hard water buildup, use 1/4 cup borax with every cleaning.

First published: 7-11-19


You may also enjoy:

How to Clean and Care for a Smooth Glass Cooktop

Outdoor Grilling on a Budget

Best Inexpensive Cast Iron Skillet and How to Love It


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program. As an Amazon Associate, we earn from qualifying purchases by linking to Amazon affiliated sites.

Print Friendly, PDF & Email

Caught yourself reading all the way 'til the end? Why not share with a friend.

3 replies
  1. Joanne King Guerriero
    Joanne King Guerriero says:

    To maintain clean toilets, I use lemon or orange flavored Kool-Aid (kind without sugar). Flush the bowl, sprinkle one packet of KoolAid and then leave overnight! Brush and flush int the morning!

    Reply
  2. Mrs. Potts
    Mrs. Potts says:

    Help! When I returned to the commode after ten minutes, the water level was well below the ring. How do I keep the water level above the ring?

    Reply

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *